e-GO 400 Titanium Quattro Motor Mover with Mounting Kit and remote - Unfitted
FOR JAYCO CARAVANS AND OTHER BOX SECTION CHASSIS
Purpleline
The Ego TITANIUM has been designed for saving weight.
Dual wheel engagement, meaning that this manual engagement motor mover can be fully engaged from either side of the caravan or trailer.
Hollow cast alloy rollers, a tailor-made crossbar and a lightweight alloy body meaning the e-go TITANIUM weighs in at only 23kg per two motors.
The Ego TITANIUM Quattro has been rigorously tested to ensure that these weight savings do not compromise the build quality, strength, longevity or ease of use of the mover.
This intelligent modular system, featuring soft-start, allows any model in the e-go range to be used on single, twin and AWD installations.
A set of movers includes a 1 motor mover for each wheel on a single axle plus connecting crossbar and is suitable for a max weight of 2,250kg.
Suitable for both single and tandem axle caravans however for tandem vans we recommend the purchase of 2 sets.
Crossbar is included. Suitable for installation to most Jayco Chassis and other box section Chassis.
(nb. Will NOT fit the new J-Tech 2.0 Jayco Suspension)
Roller Length approx. 130mm
*Standard NZMCA and dealer discount not applicable to this item
Product |
EGO400 |
Operating Voltage |
12V DC |
Avg Current Consumption |
25 Amps |
Max Current Consumption |
76 Amps |
Weight (2 Motor) |
23kg |
Combined Weight (inc fitting kit etc.) |
approx. 35kg |
Speed |
12cm per second |
Safe Working Load (SWL) |
2250kg (2 Motor)
3500kg (4 Motor) |
Min Width (Caravan/Trailer) |
1800mm |
Max Width (Caravan/Trailer) |
2500mm |
Power Source (Leisure Battery) |
12V (Min 85Ah – rec 110Ah) |
Engagement Method |
Single Lever |
Dual Wheel Engagement |
Yes |
Quattro Handset Battery Replacement
Should you need to change the batteries in the handset it is important to follow the steps below to avoid possible synchronisation issues:
-
Make sure the control box is turned off (electrically isolated)
-
Remove battery cover and batteries from the handset
-
Insert new batteries making sure they are inserted the right way around
-
Refit battery cover
-
Turn on control box
-
Double click the power button on the handset
6 month warranty
Warranty only applies if is has been installed by a Certified/trained installer
NOTE: There is no need to pair the handset or change program
Full Handset Reset
If you need to FULLY RESET the handset for any reason press and hold the 'Auto engage +' button and the 'power button' for 10 seconds.
This will restore factory settings.